CNC71 Steering Angle Increase Kit BMW E81/E82/E87/E88 E90/E91/E92/E93 - PRO kit

PRO KIT CNC71 front suspension kit specially for BMW 1 Series E8x and BMW 3 Series E9x. The kit guarantees an increase in steering angle up to 68 degrees, changes the Ackermann steering geometry, and allows quick adjustment without having to disassemble the elements. Fits perfectly into the original suspension mounts in the car's chassis. Complies with the regulations of drift series. The product is made of high-quality steel and aluminum using precise CNC machines. The kit includes lower wishbones, tie rod spacers, knuckles with all necessary hardware, and installation instructions. The individual elements of the kit are protected by powder coating or galvanization. The use of spherical bearings eliminated the need for rubber bushings, which provides a more direct and responsive feel on the track. If necessary, all spare parts are directly available from the manufacturer's warehouse - section below the description. For those who want to adjust their vehicle's alignment, the kit has specific parameters and a toe-in setting that is adjusted depending on the Ackermann angle measurements: Camber angle: -5.5 degrees Caster angle: 6.5 degrees. The kit offers 68 degrees of rotation, with the option of quick Ackerman adjustment from positive to negative by using special washers. This allows you to quickly adapt the vehicle's driving characteristics to the prevailing conditions and the driver's preferences. The kit also has an easy-to-adjust twist reduction using an eccentric bushing. In addition, the kit increases the roll center, which reduces the vehicle's tendency to lean in corners. The product allows you to set the wheels so that the car's deviation from the track is minimized over a wide range of steering angles, this is crucial for maintaining front wheel grip and the predictability of the car's handling during drift maneuvers. The kit is plug and play, the included manual contains all the necessary data to set the car to its initial position. The kit provides the necessary space for installing the required coilover suspension. NOTE: The range of wheels that work with the kit is between 17" and 19" (inches), provided that the inner diameter of the rim must not be less than 400 mm.